A standby generator wires into your main panel and whole-home generators can power your entire home or selected essential circuits, depending on the generator size and system design. It keeps your air conditioning, heating system, water heater, lights, and household appliances running without the need to manually refuel during an outage.
It runs on natural gas or propane and starts within seconds of a power failure through an automatic transfer switch, so there is nothing for you to do. Because it sits outside and vents away from the house, it also keeps carbon monoxide out of your living space.
Standby vs. portable: a standby generator starts on its own, runs for days on a fuel line, and powers hard-wired equipment like your HVAC with no extension cords to drag around. It is also permanently installed, so it stays with the house and can add to its value.
A generator install connects to your gas and electrical systems and has to pass local code, so it is work for licensed professionals. Anderson Power Services handles all of it with factory-trained technicians and a professional electrician. Once permitting is complete, installation is typically completed within a few days, although project timelines vary depending on site conditions, utility coordination, and local permitting requirements.
We review your electrical panel and main breaker and size the system.
We pull the required permits and coordinate inspection.
We set the generator, connect the fuel, and wire the automatic transfer switch into your main panel.
We commission the unit, test the transfer of power, and walk you through it.
Anderson Power Services offers maintenance and service plans with 24/7 remote monitoring, so your system is tested on a schedule and watched year-round. Most standby generators also perform automatic weekly self-tests to help ensure they’re ready when needed.
Our factory-trained technicians service Generac, Kohler, and other brands of home backup generators, even ones we did not install. We keep your generator in prime shape, so you never worry that it won’t work.
We’re a veteran-founded company serving homeowners across Georgia, South Carolina, South Alabama, and Florida. As an authorized Generac dealer, we help you match a unit to your home during a free consultation, and our technicians service Kohler, Briggs & Stratton as well
Everything happens under one roof: the free consultation, the permit paperwork, the licensed electrician who ties the transfer switch into your panel, and the startup test that proves it works. Afterward, our service plans watch the unit year-round.
The automatic transfer switch watches utility power. When it senses an outage, it disconnects your house from the grid and starts the standby generator within seconds, then sends generator power to your electrical panel. When utility power returns, it reconnects your home and shuts the generator down. You do not have to be home or flip anything.
The right size depends on how much you want to run. Some homeowners cover the whole house, while others protect a set of priority circuits like the heat, the refrigerator, and a few rooms. High-draw appliances matter most here, since an electric stove or a central AC unit pulls far more running wattage than lights and outlets. Many homes are well served by standby generators ranging from approximately 10 kW to 26 kW, depending on electrical demand and load management. We recommend the right generator for your house during a free consultation.
Most home standby generators run on natural gas or propane. A natural gas unit can run as long as the gas line supplies fuel. A propane unit runs until its tank is low, so run time depends on tank size and how much electrical load you are using. Natural gas generators receive fuel directly from the utility line, while propane generators are supplied by an on-site storage tank.
Yes. Generator installation involves gas and electrical work that must meet local code, and most counties and cities require a permit and inspection. We handle permitting and coordinate inspections as part of the installation.
After the consultation and permitting, many home installations finish within a few days on-site. The full timeline depends on how quickly permits are issued in your area and whether the utility needs to coordinate the gas or electrical connection.
A home standby generator should be serviced on a regular schedule, usually once or twice a year, with checks of oil, filters, the battery, and a test run. Our service plans include 24/7 remote monitoring so issues are caught early. Following the manufacturer’s maintenance schedule also helps keep your warranty valid.
It can, though it depends on where you live. Backup power carries the most weight with buyers in areas that lose power often, which covers much of the Southeast. Because a standby unit is permanently installed, it stays with the house and an appraiser can factor it in, unlike a portable that goes with you. What helps most is proof the system was done right: a permitted and inspected installation, documented service history, and a unit still under warranty.
Protect your home from unexpected power outages with a professionally installed standby generator. Schedule a free in-home consultation and our team will recommend the right backup power solution for your needs.
© 2026 Anderson Power Services. All rights reserved. | Sitemap